Shenzhen Best

General product information

Key Specifications/Special Features:

Electronics characteristics:
Rating: 12DC V, 1A
Contact resistance: 1kHz measured at small current (1A or less)
Insulation resistance: a voltage of 500V DC shall be applied for a minute, and between conductors which should not make contact under normal conditions after which measurement shall be made
Dielectric strength: between conductors which should not make contact under normal conditions 500V AC (50-60Hz) for 1 minute (trip current 2mA)
Endurance characteristics:
Solder ability: the terminals shall be dipped into soldering flux and shall be immersed into molten solder of 2305 degrees for a period 30.5 seconds
Resistance to soldering heat:
Solder temperature: 35010
Immersion depth: 20.5mm
Immersion time: 30.5 seconds
By a solder iron to have capacity of 60W
Cold: the jack shall be stored at a temperature of -402 for 96 hours
It shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made
Dry heat: the jack shall be stored at a temperature of -702 for 96 hours
It shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made
Humidity: the pin jack shall be subject to 90%-95%RH, 402 for 96 hours, and shall be conditioned at room ambient conditions for a period of 30 minutes
Payment Details:

Payment Terms:

TT in advanced